What to do when Windows hangs during the startup process - Windows 10 freezes on startup after update free

Looking for:

Windows 10 freezes on startup after update free 

Click here to DOWNLOAD

   

 

Windows 10 freezes on startup after update free.www.makeuseof.com

  After finishing the backup process, you can check the backup status, /28483.txt, open, or delete the backup by right-clicking the backup task on the left. July 17, at pm. If you are facing the same issue, please try them one by one. ❿  

Windows 10 freezes on startup after update free.How to Fix Freezing & Other Issues During Windows Startup

 

If it persists, proceed to the next one. Use a Windows disk, file and image correction tool 1. Clean boot For clean boot follow the steps below: 1. Click Apply and OK; 5. Restart your computer. NOTE: This procedure disables all third-party services and programs. You can later, if the problem is solved in this way, enable the programs and services that will start with Windows, selectively, instead of keeping them all disabled. If the problem returns after activating the startup of a specific service or program, the problem is exactly in the startup of this software and it is recommended to remove it.

I await news. If these procedures helped you in any way, please click on "I solved my problem" and also mark as an answer, so you can help others users. We will always be available for whatever you need! Hi, I've tried all mentioned solutions, but none of them seem to work for me. This process will take some time. I do not know if this could be any useful, but I would like to know if there is any other solutions I could try. Thanks, Christian C. Thanks for the information Christian.

A good alternative for these situations is to perform a clean install with the most current version of the system for us to evaluate. I believe that with a clean installation this problem will not exist and will work normally.

I suggest you back up important files if you don't already have it and test the procedure below please. For that first you will need to create a Windows installation USB, just follow the thread below. After completing the creation of the USB, follow this thread, it is very detailed and will assist you in the clean installation of Windows.

I did a clean install of windows and it installed the latest updates. However, it did not work. The programs become unresponsive and now there are times where my screen is completely frozen, I cannot move the mouse nor control the taskbar using the keyboard. This issue forces me to shut down the pc by holding the power button.

Thank you for the informations. Could you share your computer make and model please? I hope I can help you with your concern. Let's try to isolate the cause of the issue. Start PC in Safe Mode. If the issue doesn't persist in the Safe Mode it means the issue might be caused by a non-Microsoft driver.

To start in Safe Mode. Let me know the result. So far the issue did not appear while booting the PC into safe mode I have only tried it once for a couple hours since Safe mode did not allow me an internet connection. This may not be related but sometimes the File Explorer does not seem to open, which didn't allow to open other programs such as the Windows start menu.

This forces me to restart it through task manager. Have the same problem since the last update… my hardware is the same as above but with a different graphic card. Choose where you want to search below Search Search the Community.

Search the community and support articles Windows Windows 10 Search Community member. This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question If not, please continue to try the next method.

If the hard drive has bad sectors , the possibility of "Windows 10 stuck on loading screen" issue is great. So, you need to do disk surface test and shield the bad sectors. To achieve these aims, we recommend you to use a piece of professional partition magic manager. And MiniTool Partition Wizard is a good choice. Buy Now.

You can refer to these two posts to get the bootable media, and then boot your computer from it: 1. You need to select the target disk after entering the software's main interface, and then click on " Surface Test " feature from the left action pane.

Then, click on " Start Now " button to start surface test process. During this process, the bad sectors will be marked as red, and the normal sectors will be marked as green. Click to Tweet. If there are bad sectors on the hard disk, you need to shield them. After that, you can restart your computer. If "Windows 10 stuck on loading screen" problem happens again, the hard drive may be damaged. Under this situation, you should consider replacing the original hard disk.

However, you may want to clone the original data on the target hard drive in advance. Step 1: to clone hard drive data, you should select the disk you want to copy and click on " Copy Disk " from the left action pane. On the first pop-out window, you need to select the target disk which you want to use as the alternative disk and press " Next " to continue.

Here, you should know that the content on the target disk will be deleted. So, please make sure that there is no important data on it. Step 2: on the second pop-out window, please choose the copy options according to your own needs and click " Next " to continue. Step 3: after that, you will enter a window which tells you how to boot from the destination disk. Read the " Note " and click on " Finish " button to go back to the main interface. Then, click on " Apply " to execute this copy operation.

In addition, MiniTool ShadowMaker, free PC backup software, also offers you a feature to clone a hard drive for backup with simple clicks. Just use it to back up your disk data when Windows 10 stuck on spinning dots issue occurs due to bad sectors. After copying disk, your data on the source disk will be kept well on the destination disk. Then you will not be bothered by the risk of data loss caused by "Windows 10 hangs at loading screen" issue.

Of course, "Windows 10 freezing on loading screen" issue may be caused by other reasons. You can also try the following methods to solve this issue.

Entering Safe Mode and doing something useful is another easy way to fix this issue. Here, there are four different operations for different situations after you enter the Safe Mode. You can select a proper operation according to your actual situation.

If you encounter this issue when you are trying to update Nvidia Derivers, you can enter the Safe Mode and make a roll back of the Nvidia drivers. Then try to restart your computer in normal mode.

In some cases, "Windows stuck on loading screen" issue is caused by Windows update or other problems. At this time, you can enter the Safe Mode, do nothing and then reboot your computer.

Virus or malware may cause "Windows stuck on loading screen" issue. Why not use a piece of antivirus software to scan your computer in Safe Mode, remove all the virus and malware from your computer, and then try to restart your computer.

It is possible that the installed antivirus software conflicts with the current Windows OS, and then "Windows 10 stuck on spinning dots" issue happens when you want to start your computer. So, you can uninstall that antivirus software in Safe Mode, and then restart your computer to verify whether it is normal.

On condition that this method is unavailable for your case, we have the fourth way to be recommended. Please read on. Windows 10 Update is available now.

In this post, we will show you how to get the Windows 10 Update using different methods. In case that there is something wrong with Windows 10 system, you can do system repair to fix it. Since you can't boot Windows 10 normally, you need to use a Windows 10 installation CD or enter the Safe Mode to open command prompt window and type " bootrec.

If the above four methods can't fix "Windows 10 freezing on loading screen" issue, you can also do a System Restore which will take your computer back to an earlier point in time. However, you have to make sure that there is a full system backup on your computer, and the system protection is turned on. Here, you still need to do it in Safe Mode. If this method doesn't work for you, please try the next method to fix Windows 10 stuck on spinning dots issue.

If your computer has been used for more than three years, you should consider replacing the CMOS battery. There are real cases show that if CMOS battery is powered off for an extended amount of time, "Windows 10 hangs at loading screen" issue may happen when you boot your computer. Under this circumstance, you should cut off the power of your computer, open the computer case, and reinstall the RAM.

❿     ❿